My glasses are sitting too low on my nose?
When your glasses are sitting too low on your nose please follow these easy steps to improve the fit.
ADJUSTING WIREFRAMES
Use your thumbs to push the nose pads closer together, carefully using small movements on either side equally. That is, push a tad on one side and a tad on the other – try them on – if they are still too low try a small amount on each side again until they fit snugly against either side of your nose. Be sure not to have them too tight so that they might cut into your nose – they should be snugly fitting along the side of your nose
ADJUSTING PLASTIC OR ACETATE FRAMES
One of two ways:
A) Run a hairdryer for 30 seconds over the part of the frame you want to bend the heat will soften the plastic.
or
B) Run hot to warm (not scathing hot) water on the bridge (carefully so as not to spill it on the lenses) or on the temples.
Bend inward at the bridge, the hinges, or the bend of the temple arm, to make the frame fit more snugly.
a. Pushing temples down after heating will tighten the temples by shortening the length so that the glasses don’t fall off.
b. Bending the bridge inward will reduce the opening of the frames and move them tighter towards your face
c. Pushing the hinges carefully inwards will make the frames snugger at the temples, the temples will closer to the temples of your head – this will also contribute to making the frames fit better.
As always if you need our help we are but a call away at 866 217-5878, 9 a.m.–7 p.m. PT daily or Text 213 769-8009 or emailing us
SHOP FOR YOUR NEW GLASSES NOW